1911 Parts

The BattleCrown™

What is the BattleCrown™ ? The BattleCrown™ is an extremely heavy duty barrel bushing with a thick flange that precisely follows the outside contour of the slide, with an angled bottom, for a very distinctive and clean look.  The front...

Government/Commander GI Mainspring Housing with Lanyard Loop

Guncrafter Industries stainless steel Mainspring Housing, with our 20LPI checkering and lanyard loop.

Grip Screw O-Ring (4 Count)

  Further isolation and attenuation of shock can be achieved by the use of a special O-ring fitted to the grip screw. As the screw is tightened, the O-ring is forced downward and outward, imposing itself between the hexagonal flats of the bushing...

Guncrafter 1911 Recoil Spring Plug - Government

The Guncrafter Recoil Spring Plug is the perfect fit for our thick flange barrel bushing. Machined from bar-stock, this recoil spring plug will fit government size 1911's, and the .140" end is designed to work with our thick flange bushing...

Government Frag Pattern Mainspring Housing

Our Government/Commander Mainspring Housing with Frag pattern is machined from bar stock.

Recoil Spring, 18 Lb.

Precision load rated recoil springs for the replacement your worn spring recoil spring.  After some time springs fatigue and should be replaced for optimal function.  To keep your pistol running at it's best you should not only clean it, you...

Recoil Spring, 20 Lb.

Precision load rated recoil springs for the replacement your worn spring recoil spring.  After some time springs fatigue and should be replaced for optimal function.  To keep your pistol running at it's best you should not only clean it, you...

Guncrafter Industries Slide Stop

The Guncrafter Industries slide stop is machined from either stainless or carbon bar stock steel for superior performance and durability. All of our parts need to be fitted by a gunsmith. Please select caliber, and type of steel. 

Bushing O-Ring (4 count)

  The bushing O-ring is simply slipped around the bushing and retained by the groove. As the grip screws are tightened, the O-ring is forced down a conical seat and outward against the counterbore. When the grip is fully seated, the...

Guncrafter Industries Match Grade 1911 Barrels

Guncrafter Industries barrels are manufactured from 416R stainless steel and feature button pulled rifling with 6 lands and grooves. These barrels are over-sized, and require work to make them fit in your pistol. These are the same great barrels that we...

Recoil Spring, 22 Lb.

Precision load rated recoil springs for the replacement your worn spring recoil spring.  After some time springs fatigue and should be replaced for optimal function.  To keep your pistol running at it's best you should not only clean it, you...

Hellcat Slide Stop

Our Custom Hellcat Slide Stop, Prepped and in the White, ready to be fit to your pistol and sent out to finish! This product is intended for Guncrafter Industries 1911's.   Currently Only Available in Carbon Steel

Government/Commander Round Butt 15LPI Mainspring Housing

Our Officer Mainspring Housing round butt 15 LPI checkering is machined from billet aluminum, and is 1/3 the weight of traditional steel.

Match Grade Guncrafter Industries Thick Flange Barrel Bushing

The Match Grade Guncrafter Industries Thick Flange Barrel Bushing has been extended to give more barrel support, and made thicker to be one of the toughest options available on the market.   Available for Government and Commander.

Recoil Spring, Commander, 11 Lb.

Precision load rated recoil springs for the replacement your worn spring recoil spring.  After some time springs fatigue and should be replaced for optimal function.  To keep your pistol running at it's best you should not only clean it, you...

Threaded Barrel 5/8-24 TPI, RH, 5.3" for 50 GI conversion units

This match grade barrel for our 50 GI conversions units will fit OUR 50 GI slides with little to no fitting. It will not fit in a std. Glock® slide -  being in 50 GI caliber our barrel is much bigger than a std. Glock®...

Recoil Spring, Government/Commander, 12 Lb.

Precision load rated recoil springs for the replacement your worn spring recoil spring.  After some time springs fatigue and should be replaced for optimal function.  To keep your pistol running at it's best you should not only clean it, you...

Officer/Compact Round Butt 15LPI Mainspring Housing

Recoil Spring, Government, 10 Lb.

Precision load rated recoil springs for the replacement your worn spring recoil spring.  After some time springs fatigue and should be replaced for optimal function.  To keep your pistol running at it's best you should not only clean it, you...

4.6" Barrel for 50 GI conversion units

This match grade barrel for our 50 GI conversions units will fit OUR 50 GI slides with little to no fitting. It will not fit in a std. Glock® slide -  being in 50 GI caliber our barrel is much bigger than a std. Glock®...