(prices
subject to change without notice)
(all prices do not include shipping charges)
| 1911 Custom Pistols: |
#M150 |
Model No.1 50GI |
$3185.00 |
|
#M145 |
Model No.1 .45 ACP |
$3185.00 |
#M250 |
Model No.2 50 GI |
$3185.00 |
|
#M245 |
Model No.2 .45 ACP |
$3185.00 |
#M350 |
Model No.3 50 GI |
$3185.00 |
|
#M350 |
Model No.3 .45 ACP |
$3185.00 |
| #NN45 |
"Pistol with no Name", .45 ACP (5" - full size) |
$2695.00 |
| #NN45C |
"Pistol with no Name", .45ACP (4.25" - Commander size) |
$2695.00 |
| #NN45CCO |
"Pistol with no Name", .45ACP (Officer size frame – 4.25” Commander size slide/barrel) |
$2795.00 |
| #AM45 |
AMERICAN, .45 ACP |
$2895.00 |
| Custom Options: (some options require additional lead time): |
| #MCONV |
Caliber Conversion Unit for M1/M2/M3 (50GI or .45ACP)
(consists of match grade barrel, one magazine and recoil spring)
*Will only work on M1/M2/M3 pistols and requires pistolsmith fitting. No fitting charge if ordered with pistol. |
$395.00 |
| |
Labor for retro-fitting Conversion Unit (including test-firing) |
$115.00 |
| #NADJ |
Novak Adjustable Tritium rear sight |
$95.00 |
| #AMBI |
Ambidextrous thumb safety |
$80.00 |
| #MHC |
Hard Chrome finish |
$425.00 |
| #MEL |
Melonite finish |
$275.00 |
| #SS |
Stainless Steel finish |
$325.00 |
| #RD |
Reverse Duo-tone finish |
$275.00 |
| #BOB |
Bobtail frame for reduced carry profile |
$185.00 |
| #RB |
Round Butt frame |
$135.00 |
| #SERST |
Serrated slide top |
$175.00 |
| #FCDC |
Flush cut/deep crown barrel |
$95.00 |
| #FCCF |
Flush cut slide stop/chamfer frame |
$40.00 |
| #HPS |
High Polish sides of slide |
$150.00 |
| #CLE |
Custom laser engraving, text or logo, starting at |
$85.00 |
| Model No.1, 2 and 3 Accessories: |
| #MAG-50 |
Magazine (for M1/M2/M3 only) 50GI 7rd |
$49.95 |
| #MAG-45 |
Magazine (for M1/M2/M3 only) .45ACP 8rd |
$49.95 |
| # FFM-50 |
Flush fit magazine (for M1/M2/M3 only), 50 GI 6rd |
$79.95 |
| # FFM-45 |
Flush fit magazine (for M1/M2/M3 only), .45 ACP 7rd |
$79.95 |
| #M22RS |
22# Replacement recoil spring for 50GI M1/M2 |
$7.95 |
| #M25RS |
25# Replacement recoil spring for 50GI M3 |
$8.95 |
| #MCPB |
Replacement CP Super Tuff Buffs (special contour for 50GI guide rods) 5 pack |
$6.50 |
| Genuine GI 1911 Aftermarket Accessories: |
| #AG |
Aluma-Grips with GI logo (olive drab) |
$59.95 |
| #AGCF |
Aluma –Grips with curved FRAG pattern, black |
$66.95 |
| #SG |
Shredder Grips (gray/black) |
$64.95 |
| #LMSH |
Lanyard loop mainspring housing (Parkerized or SS) 20 lpi checkering |
$59.95 |
| #RBMSH |
Round butt mainspring housing (Parkerized , SS or Aluminum) 15 lpi checkering |
$59.95 |
| #SLST |
Slide stop, machined from bar stock |
$58.75 |
| #TFBB |
Thick flange barrel bushing |
$24.75 |
| #RP |
Reverse recoil spring plug, open or closed end |
$15.75 |
| #RSP |
Recoil spring plug with .140 nose to fit thick flange bushing |
$9.95 |
| #RS-U |
Rear sight, with U-notch |
$52.75 |
| #RS-SQ |
Rear sight with square notch |
$52.75 |
| #RS-T |
Rear sight with Tritium insert |
$79.75 |
| #1911MAG |
8 rd. magazine, .45 ACP |
$33.95 |
Loaded Ammunition:
50GI Factory Ammunition |
| #GI300A |
300gr. JFP 700 fps 20/rds |
$25.25 |
|
#GI185A |
185 gr. CHP 1200 fps 20/rds |
$42.25 |
| #GI275A |
275gr. JHP 875 fps 20/rds |
$26.75 |
|
#GI230A |
230gr. CHP 1000 fps 20/rds |
$42.25 |
| Reloading Supplies: |
| #GILD |
Lee 50GI Reloading dies - 4 die set |
$75.00 |
| #GIB |
50GI Brass |
$0.42/case |
| GI Bullets ( .500dia. ) Suitable for the GI cartridge as well as .50AE and .500 S&W Magnum cartridges. |
| #GI275B |
275gr. GI JHP |
$108.50/500
$217.00/1000 |
|
#GI300B |
300gr. GI JFP |
$103.50/500
$207.00/1000 |
| #GI185B |
185gr. GI CHP |
$62.50/50 |
|
#GI230B |
230gr. GI CHP |
$62.50/50 |
| 50 GI conversion for Glock |
| #GI1S |
Drop-in conversion unit for Glock_ 20/21, in 50 GI, complete top end + magazine |
$595.00 |
| #GIB |
Drop-in conversion for Glock _20/21, in 50 GI, as above but with Black Melonite finish |
$660.00 |
| #GI6GB |
6” barrel in 50 GI cal. Glock , can be threaded for suppressor, requires fitting |
$275.00 |
| #GI2 |
Extra magazine for Glock_ in 50 GI, 9 rds |
$49.95 |
Payment Terms:
- Pre-payment, C.O.D.,
Visa and Mastercard are accepted. Company and personal
checks are also accepted but must clear before shipping.
Pistol sales are 1/2 down when placing order, remaining
1/2 due shortly before shipping pistol(s) Prices
are subject to change without notice.
- All Prices F.O.B.
Huntsville, Arkansas and are subject to change without
notice.
- Please call for
Law Enforcement/Military requirements.
A note on delivery
times:
Please keep in
mind that these are precision handcrafted pistols.
We strive to keep delivery times reasonable if we
do not have an item in stock. However, we will not
sacrifice quality and reliability for speedy delivery
under any circumstances.
|
